Rentals

iKan Pivot

The iKan Pivot is a compact handheld gimbal which gives you the ability to use your favorite DSLR camera and record flawlessly stabilized footage. You can also manually control the tilt and pan of the gimbal, opening up the possibility to creating smooth locked down shots.

  • Daily Rate: $80
  • Weekly Rate: $240
  • Monthly Rate: $800

Add to estimate

Steadicam Steadimate Gimbal Adapter

The Steadicam Steadimate allows you to attach a motorized gimbal onto your steadicam arm, making it easier to operate your gimbal for a longer period of time without muscle strain.

  • Daily Rate: $40
  • Weekly Rate: $120
  • Monthly Rate: $400

Add to estimate

DJI Ronin 2

Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.

  • Daily Rate: $375
  • Weekly Rate: $1,125
  • Monthly Rate: $3,750

Add to estimate

    "A newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed. Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams, and more. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.

    Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.

    The gimbal features:

    - 30-Pound Payload Capacity
    - Enhanced SmoothTrack Algorithm and GPS
    - Upright, Underslung, and Briefcase Modes
    - Easy Underslung/Upright Transitions
    - 2-Axis Mode for Use with Steadicam
    - Retractable Feet/Self-Supporting Design
    - Camera Control for Select Cameras
    - 2.4 / 5.8 GHz Switchable Remote
    - Up to 0.6-Mile Control Range"

DJI Osmo with X5R Camera

12.8 stops dynamic range for enhanced highlight and shadow detail
H.264 and Cinema DNG RAW video recording
Records video and stills to micro-SDHC/SDXC cards or SSD Drives. A 512GB SSD flash drive is included
Single shot or take bursts for 3, 5, or 7 frames
Time-lapse mode captures photos at stepped intervals between 3 and 60 seconds
Program, Aperture Priority, Shutter Priority, and Manual exposure modes

  • Daily Rate: $135
  • Weekly Rate: $405
  • Monthly Rate: $1,350

Add to estimate

ikan EC1 Beholder 3-Axis Gimbal Kit

It takes seconds to attach a DSLR or mirrorless camera and you are ready to capture some jaw-dropping moving shots.

  • Daily Rate: $75
  • Weekly Rate: $225
  • Monthly Rate: $750

Add to estimate

Zacuto Recoil Rig

Classic 15mm Rod based shoulder rig, originally made popular by C300 and Red Scarlet shooters. Compete with 2 handles, baseplate, shoulder pad, and counter weight.

  • Daily Rate: $60
  • Weekly Rate: $180
  • Monthly Rate: $600

Add to estimate

Easyrig Minimax

This small easyrig is ideal for DSLRs and small camera rigs weighing 4.4-15.4 lbs. It helps more comfortable distribute the weight of your rig for those days of extended handheld shooting. In addition to operator comfort the easyrig will help to stabilize your handheld shots by providing vertical tension, limiting camera shake.

  • Daily Rate: $75
  • Weekly Rate: $225
  • Monthly Rate: $750

Add to estimate

DJI Ronin MX

The Ronin MX is an improved iteration of DJI's DSLR and small camera stabilizer, the Ronin MX. Improvements upon its predecessor include a full camera cage, a re-positioned battery mount (for improved balance), and virtually silent motors. Originally designed to be used with DJI's M600 drone, these improvements also allow for an overall better user experience while using the Ronin MX as a handheld stabilizer.

  • Daily Rate: $160
  • Weekly Rate: $480
  • Monthly Rate: $1,600

Add to estimate

Syrp Genie Mini (Panning) Motion Control

The genie mini allows for motion control pan moves. It has a 8.8 lb load

  • Daily Rate: $15
  • Weekly Rate: $45
  • Monthly Rate: $150

Add to estimate

Ready Rig GS

The GS in Ready Rig GS stands for Gimbal Support. It allows a Movi or Ronin operator to shift the weight of their rig from their arms and shoulders to their hips and legs. The rig also helps the user stabilize the vertical axis and has adjustable tension to do so. The advantage of the Ready Rig GS over other options for gimbal support are that it supports inverted operation and does not limit the operator's range of movement in any way.

  • Daily Rate: $170
  • Weekly Rate: $510
  • Monthly Rate: $1,700

Add to estimate

DJI Ronin-M

The smaller version of DJI's popular handheld gimbal can support up to 8 lbs. It comes with a remote control and a iPod touch for complete tuning and control of the gimbal.

  • Daily Rate: $160
  • Weekly Rate: $480
  • Monthly Rate: $1,600

Add to estimate

Shape Handheld Rig

This rig has been the most popular for our Doc and News shooters with the C300, FS7, and F5 packages. The rig does a great job helping to balance these lightweight cameras by placing them directly on top of your shoulder without compromising a shoulder pad. The baseplate has rod mounts on the front and back but does not allow for rods to pass all the way through. It comes with rosette style, extendable arms with super easy on the fly push button adjustment. Our rig also includes a v lock delta adapter to put on your tripod for quick switches from tripod to your shoulder.

  • Daily Rate: $80
  • Weekly Rate: $240
  • Monthly Rate: $800

Add to estimate

Aquatech Elite Canon 5D III Housing

- Depth Rating 33'
- Access To Most Camera Buttons
- Interchangeable Lens Port Accommodates Lens Specific Housings
- Only For 5DIII, 5Ds, 5Dsr
- HWC Carries 16-35 & 24-70 Ports

  • Daily Rate: $150
  • Weekly Rate: $450
  • Monthly Rate: $1,500

Add to estimate

Porta Jib Traveler

- Reach 38-55"
- Boom 41-68"
- Supports Up to 40 lbs
- 3x Rolling Cases!
- 100mm Bowl

  • Daily Rate: $160
  • Weekly Rate: $480
  • Monthly Rate: $1,600

Add to estimate

MYT Works Knuckle 2.5′ To 5′ Skater Dolly

- Light Weight
- Mountable to 2x Light Stands or 1x Tripod Legs
- Center Support Included For Extending The Dolly
- 75mm + 100mm Bowl Included

  • Daily Rate: $105
  • Weekly Rate: $315
  • Monthly Rate: $1,050

Add to estimate

Steadicam Scout

- Camera Stabilizer
- 5-18 lb Payloads Supported
- Camera Mounts Via Dovetail Plate
- 7" HD Monitor With HDMI + SDI Inputs, SDI Output Only
- On Board V Mount Plate To Power Accessories + Help Balance
- Learning Curve! Contact Us To Schedule A Demo!

  • Daily Rate: $260
  • Weekly Rate: $780
  • Monthly Rate: $2,600

Add to estimate

Easyrig Vario 5 Gimbal Rig Vest With 9″ Arm

- Weight Adjustable For 11-38 lb payloads
- 9" Arm Design To Clamp To Top Handle Of Gimbals
- Extension Of Hook Adjustable To Have Gimbal Closer Or Further From Your Body
- Takes Weight Off Your Arms & Puts It On Your Legs

  • Daily Rate: $195
  • Weekly Rate: $585
  • Monthly Rate: $1,950

Add to estimate

Easyrig 400N

- Takes Weight Off Your Arms/Back and Puts It on Your Hips/Legs
- Rated For 17-22lbs
- Helps Stabilize Handheld Shots

  • Daily Rate: $140
  • Weekly Rate: $420
  • Monthly Rate: $1,400

Add to estimate

MYT Works Bare Knuckle 2.5′ to 5′ Skater Dolly

The build quality of this lightweight slider replacement that can expand from 2.5' to 5' is excellent. The travel is smooth and quiet - excellent for run and gun shooting.

  • Daily Rate: $95
  • Weekly Rate: $285
  • Monthly Rate: $950

Add to estimate

RigWheels Passport Camera Dolly

This is a smaller version of the Dana Dolly. It provides rock solid support for 100 lb. payloads. The Dolly and 6.3' of track fit inside a 50' flight-ready Pelican 1610 case. Like the Dana Dolly the travel is very smooth. Two C-stands and a tripod head are included.

  • Daily Rate: $120
  • Weekly Rate: $360
  • Monthly Rate: $1,200

Add to estimate

Kessler Second Shooter

The Second Shooter™ features 100% repeatable motion control for live-mode, looping, time-lapse and stop-motion applications.
Second Shooter™ receives feedback communication from digital-encoded motors in determining motor positions to ensure precise control. Second Shooter™ provides users with ultra-smooth and quiet motion control.

  • Daily Rate: $95
  • Weekly Rate: $285
  • Monthly Rate: $950

Add to estimate

Manfrotto MVH500A

This lightweight tripod offers a wider platform for HDSLR bodies and the sliding plate travels to balance the latest interchangeable lens cameras. The entry-level 500 ensures smooth shots and fine control with up to 5kg (11 lbs) of equipment. .
Beautifully smooth shots: the 500 has professional fluid cartridges on both pan and tilt axes to ensure that every camera movement is smooth, controlled and precise. .
Faster, easier and safer to use: the side lock system allows the camera and sliding QR plate to click quickly into the head from above, instead of needing to be aligned and slid in from the back. No secondary safety lock is necessary. The side lock system also makes it quicker and simpler to lift the camera out of the head from above.

  • Daily Rate: $30
  • Weekly Rate: $90
  • Monthly Rate: $300

Add to estimate

Kessler Stealth Slider – 28.5 inches

The Stealth is a hybrid camera slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the drag control of our CineSlider™. Features include drag control, measuring tape, smooth rolling precision stainless steel ball bearing wheels and multiple mounting options.
Two tripods included

  • Daily Rate: $75
  • Weekly Rate: $225
  • Monthly Rate: $750

Add to estimate

Wooden Camera Handheld rig

Wooden Camera is known for their build quality and this rig upholds the tradition. It can easily be adjusted to suit your handheld comfort configuration. It is ideal for the Sony PXW-FS7 but will also work with our Red Epic and Black Magic Cameras.

  • Daily Rate: $75
  • Weekly Rate: $225
  • Monthly Rate: $750

Add to estimate

Easyrig 300N

The Easyrig 300N can handle cameras weighing 11 - 16 pounds. The Easyrig reduces the static load on the neck and shoulder muscles while holding the camera at chest level.
An overhead support arm is attached to a back and hip support system for fatigue relief.

  • Daily Rate: $105
  • Weekly Rate: $315
  • Monthly Rate: $1,050

Add to estimate

Sachtler Video 20

  • Daily Rate: $90
  • Weekly Rate: $270
  • Monthly Rate: $900

Add to estimate

DJI Mavic Pro with Epson Moverio BT-300 Smart Glasses

DJI has done it again! This tiny drone can be controlled by IOS devices and can race along at 40 mph! Paired with Epson Moverio googles, drone flying becomes totally immersive. The Mavic Pro has Collision Avoidance and responds to arm gestures! You will be amazed!

  • Daily Rate: $95
  • Weekly Rate: $285
  • Monthly Rate: $950

Add to estimate

DJI Ronin Stabilizing System

Basic camera stabilization device weighing six pounds more than the MoVIs. Good for up 16 pound payloads. Like the MoVIs, the Ronins have a steep learning curve. Our staff has considerable hands on experience with MoVIs and Ronins.

  • Daily Rate: $215
  • Weekly Rate: $645
  • Monthly Rate: $2,150

Add to estimate

Manfrotto Fluid Monopod with 500 Series Head

Aluminum
4 Sections
3 Mini Legs at Base for Stability
Maximum Height: 6.6'
Closed Length 30.3"
Weighs 4.6 lbs
Supports up to 11 lbs

  • Daily Rate: $35
  • Weekly Rate: $105
  • Monthly Rate: $350

Add to estimate

Aqua Tech DC-5 V2 For Canon 5D MarkII & MarkIII

This housing is designed to look, feel, and operate like your camera, using tactile controls instead of levers and gears. The DC-5 v2 is good to a depth of 33'. Lens ports are necessary to allow use of different lenses.
We have lens ports for the Canon 16-35 and Canon 24-70 zooms.

  • Daily Rate: $150
  • Weekly Rate: $450
  • Monthly Rate: $1,500

Add to estimate

Teenie Weenie Camera Mount

The Teenie Weenie 4 Cup Camera mount plus Hot Shoe Triangulation Kit packages constitutes an ultra-stable car mount for light to medium weight cameras.
The 4 Cup Camera Mount includes 4.5" suction cups with 3/8" threaded spuds for added strength, a counter sunk cheese plate that serves as a mounting platform, a ball leveling head for camera adjustments and a full line of rods for multiple setups.
The Hot Shoe Triangulation Kit provides extra stability. The kit works by securing the camera itself to 2 more suction cupped rods via the hot shoe mount.

  • Daily Rate: $75
  • Weekly Rate: $225
  • Monthly Rate: $750

Add to estimate

Cambo Crane

Cambo Crane With Additional 15’ Reach

With the additional 15 feet of reach the Cambo Crane can support 25 lbs.

  • Daily Rate: $325
  • Weekly Rate: $975
  • Monthly Rate: $3,250

Add to estimate

Cambo Pan & Tilt Motor

Cambo Crane Pan & Tilt Motor

This motor offers easy panning and tilting of the Cambo-mounted camera.

  • Daily Rate: $70
  • Weekly Rate: $210
  • Monthly Rate: $700

Add to estimate

Cambo Jib Arm

Cambo Jib Arm With 5’ Reach

This is a very rugged 5 foot jib arm that can support up to 40 lbs.

  • Daily Rate: $190
  • Weekly Rate: $570
  • Monthly Rate: $1,900

Add to estimate

Redrock Micro One Man Crew Director

The One Man Crew Director is a 36" motorized parabolic slider that lets you add cinematic motion without needing a dedicated operator. Able to handle loads weighing up to 22 pounds, the slider also features remote control functionality, letting you setup and control the slider from your mobile device. Additionally, the app can control camera start/stop recording.

The One Man Crew Director is quick to set up and easy to use thanks to intuitive controls and laser-assisted subject placement. It is able to capture nearly every shot typically found in interviews, including wide master shots, "two shots", and closeups. In addition to interviews, the slider is also well-suited to product shots, b-roll inserts and time lapses.

The curved rail helps keep your subject stationary within the frame and in focus without the assistance of an operator. With the ability to quickly reset the slider for your next interview question and adjust the speed on-the-fly to match the pacing of the interview, the remote app is an invaluable tool for single-person crews. You can even use gesture control on your mobile device to control the slider without ever having to take your eyes off of your subject.

This is an extraordinary tool!

  • Daily Rate: $125
  • Weekly Rate: $375
  • Monthly Rate: $1,250

Add to estimate

Kessler Pocket Jib Traveler

Kessler Pocket Jib Traveler & tripod

The Pocket Jib Traveler offers an ultra-portable jib solution - 27 inches in length when collapsed with a vertical travel distance of 72 inches when fully extended. Excellent design & portability.

  • Daily Rate: $95
  • Weekly Rate: $285
  • Monthly Rate: $950

Add to estimate

Kessler Pocket Dolly

Kessler Pocket Dolly

At just 39.5" in length and 7.5 pounds, the Pocket Dolly is very portable.
One tripod included.

  • Daily Rate: $60
  • Weekly Rate: $180
  • Monthly Rate: $600

Add to estimate

Kessler Stealth Slider

Kessler Stealth Slider – 40.5 Inches

The Stealth is a hybrid camera slider that combines the lightweight portable rail & carriage system of our standard Pocket Dolly™ with the drag control of our CineSlider™. Features include drag control, measuring tape, smooth rolling precision stainless steel ball bearing wheels and multiple mounting options.
Two tripods included

  • Daily Rate: $85
  • Weekly Rate: $255
  • Monthly Rate: $850

Add to estimate

Kessler CineS;lider 5 feet

Kessler CineSlider 5 Feet

Length 60.5" Travel 51" Weight 12 lbs. Load capacity 80 lbs.
Features include drag control and locking, handle with adjustable arc diameter for ultimate movement control, smooth rolling precision stainless steel ball bearing Delrin wheels, and multiple mounting option. Motor optional.
Two tripods included.

  • Daily Rate: $95
  • Weekly Rate: $285
  • Monthly Rate: $950

Add to estimate

Kessler CineSlider 3 feet

Kessler CineSlider 3 Feet

Length 40.5" Travel 35.5" Weight 10 lbs. Load capacity 80 lbs.
Features include drag control and locking, handle with adjustable arc diameter for ultimate movement control, smooth rolling precision stainless steel ball bearing Delrin wheels, and multiple mounting option. Motor optional.
Two tripods included.

  • Daily Rate: $75
  • Weekly Rate: $225
  • Monthly Rate: $750

Add to estimate

Indie dolly curved track

Indie Curved Track For Singleman & Universal Dollies

The curved track is housed in a compact case. No tools required for set-up.

  • Daily Rate: $50
  • Weekly Rate: $150
  • Monthly Rate: $500

Add to estimate

Indie dolly 12 foot straight tract

Indie 12 Foot Straight Track For Singleman & Universal Dollies

The 12 foot straight track section is housed in a compact case. No tools required for set-up.

  • Daily Rate: $35
  • Weekly Rate: $105
  • Monthly Rate: $350

Add to estimate

Indie Singleman dolly

Indie Singleman Dolly With 12 Foot Straight Track

The Singleman (Single person) Dolly is a portable, spreader-based dolly system that requires only one person to set-up and operate. It supports up to 30 pounds, includes interchangeable studio castors and track wheels, and fits into a soft-sided carry case. The Dolly is designed to support your tripod and allow it to ride on available tracks. The heart of the system is the spreader unit that folds for transport and features adjustable arms to fit your tripod and available dolly track. We include 12 feet of straight track. An excellent low price dolly option

  • Daily Rate: $50
  • Weekly Rate: $150
  • Monthly Rate: $500

Add to estimate

Indie Universal Dolly

Indie Universal Dolly With 12 foot Straight Track

The Indie Universal Dolly is a dolly that works on straight track as well as curved track (without having to add any accessories). This dolly is adjustable to any track width and doesn't require any tools for set up.
The Dolly Seat can be placed in four different positions on the dolly for various shooting angles.
This unit comes in two compact cases and we include 12 feet of straight. This is an excellent dolly for artists on a tight budget.

  • Daily Rate: $90
  • Weekly Rate: $270
  • Monthly Rate: $900

Add to estimate

Dana Dolly

Dana Dolly

The Dana Dolly can accommodate camera rigs up to 100 pounds with ultra-smooth travel. We include 6 or 8 foot rails and stands especially designed to support the Dana on uneven terrain. This is our most popular Dolly/Slider.

  • Daily Rate: $110
  • Weekly Rate: $330
  • Monthly Rate: $1,100

Add to estimate

Matthews Doorway Round-d-Round Dolly

The Round-d-Round Doorway Dolly offers all-wheel steering which allows for greater turning flexibility and will turn in a tight 6 foot (2 meter) circle.
The camera operator seat will mount in six different fixed locations. Steering from both ends of the dolly will allow unlimited camera positioning as the dolly rolls on track or on the ground with the standard pneumatic rubber tires. Load capacity is over 1100 pounds. We include the Bazooka camera support.

  • Daily Rate: $120
  • Weekly Rate: $360
  • Monthly Rate: $1,200

Add to estimate

Cardellini Tri-hat

Cardellini Tri-Hat

The most versatile 3-legged hi hat ever. Easy leveling. Interchangeable legs slide up/down and angle at the ends of three radiating arms. Arms can be pivoted or slid in and out to control where feet land.

  • Daily Rate: $55
  • Weekly Rate: $165
  • Monthly Rate: $550

Add to estimate

Cinevate Dromos

Dromos works as a hi hat for your camera or tripod head, allowing you to level and articulate in any position. Setup can be as simple as placing Dromos on the ground using the Dromos Hi Hat Board. You can also achieve that ultra low shot by attaching it to a tripod, jib, dolly or slider via the cheese plate - which provides both 3/8" and 1/4" holes.

  • Daily Rate: $30
  • Weekly Rate: $90
  • Monthly Rate: $300

Add to estimate

Manfrotto 529B Hi-hat

Manfrotto 529B 100mm Half Bowl

Max. Height: 7.68"
Min Height: 5.7"
Folded Length: 8'
Supports up to 44 lb
Weight: 5.95 lb

  • Daily Rate: $20
  • Weekly Rate: $60
  • Monthly Rate: $200

Add to estimate

Sachtler Video 18

  • Daily Rate: $80
  • Weekly Rate: $240
  • Monthly Rate: $800

Add to estimate

Sachtler DV12

  • Daily Rate: $70
  • Weekly Rate: $210
  • Monthly Rate: $700

Add to estimate

Sachtler FSB – 8

  • Daily Rate: $55
  • Weekly Rate: $165
  • Monthly Rate: $550

Add to estimate

Sachtler FSB – 6

  • Daily Rate: $45
  • Weekly Rate: $135
  • Monthly Rate: $450

Add to estimate

Manfrotto 504

  • Daily Rate: $45
  • Weekly Rate: $135
  • Monthly Rate: $450

Add to estimate

O’Connor 2575C Head With Standard And Baby Legs & Hi-Hat

The O'Connor ULTIMATE 2575C Fluid Head is capable of supporting camera payloads up to 133 lbs and offers handle connections on all four corners.

Why we like the 2575C
Sinusoidal Counterbalance System
Provides true finger-tip counterbalance at any angle within tilt range
True Fluid Dampening
Step-less fluid dampening specifically enhanced for film applications
Dual Adjustable Pan Arms
Four rosettes are offered for placing pan arm at front locations as well as rear.
Dependable Caliper Disk Brakes
Fail-safe pan and tilt braking to ensure the safety of precious camera payloads.

  • Daily Rate: $160
  • Weekly Rate: $480
  • Monthly Rate: $1,600

Add to estimate

Manfrotto 695CX with Manfrotto 701 Fluid Head

Carbon Fibre
5 Sections
Maximum Height: 63.19"
Folded Length: 18.7
Supports 11 lb
Weighs 1.32 lb

  • Daily Rate: $30
  • Weekly Rate: $90
  • Monthly Rate: $300

Add to estimate

Manfrotto 685B with Manfrotto Fluid Head

Aluminum
3 Sections
Maximum Height: 63.9"
Folded Length: 29.3
Supports 17.6 lb
Weighs: 2.4 lb

  • Daily Rate: $25
  • Weekly Rate: $75
  • Monthly Rate: $250

Add to estimate

Manfrotto 680B with Manfrotto Fluid Head

Aluminum Construction
4 Sections
Maximum Height: 60.63"
Closed Length: 20"
Supports 22 lb
Weight: 1.83 lb

  • Daily Rate: $20
  • Weekly Rate: $60
  • Monthly Rate: $200

Add to estimate

Steadicam Pilot

Steadicam Pilot

The Steadicam Pilot is a lightweight stabilizer system designed for cameras from 2 to 10 pounds. It features a 5.8" NTSC/PAL LCD monitor, Iso-elastic Arm and ultra low profile vest, lightweight sled with CarbonLite expandable post.

  • Daily Rate: $175
  • Weekly Rate: $525
  • Monthly Rate: $1,750

Add to estimate

Glidecam HD4000

The Glidecam HD4000 is a lightweight, hand-held camcorder stabilizing system. Camera stabilization systems like this one work to provide camera stability during movement for dynamic and subjective camera shots. It utilizes a balancing system that dampens the user's body movement, providing a smooth, floating moving image appearance usually achieved with more expensive equipment.

  • Daily Rate: $45
  • Weekly Rate: $135
  • Monthly Rate: $450

Add to estimate

Redrock micro eyespy

Redrock Micro DSLR eyeSpy Balance Shoulder Mount

The eyeSpy Standard is a very good basic shoulder mount for DSLRs.

  • Daily Rate: $45
  • Weekly Rate: $135
  • Monthly Rate: $450

Add to estimate

Freefly MōVI Pro

MōVIs are widely acknowledged as the best of the 3-axis digital camera stabilizing gimbal systems. Hello World was the first company to offer the MōVI in New York City. We offer the largest rental selection. The MōVI Pro handles cameras up to the weight of the Canon C300. All our packages include the latest refinements. We would be delighted to give one-on-one demos. Also, we have experienced operators on staff available for your project.

  • Daily Rate: $425
  • Weekly Rate: $1,275
  • Monthly Rate: $4,250

Add to estimate

Freefly Systems MōVI M5 Stabilizing system

MōVIs are widely acknowledged as the best of the 3-axis digital camera stabilizing gimbal systems. Hello World was the first company to offer the MōVI in New York City. We offer the largest rental selection. The MōVI M5 is ideal for DSLRs. All our packages include the latest refinements. We would be delighted to give one-on-one demos. Also, we have experienced operators on staff available for your project.

  • Daily Rate: $220
  • Weekly Rate: $660
  • Monthly Rate: $2,200

Add to estimate

Latest News

THE WARNER MUSIC GROUP CONTEST

The Warner Music Group hired us to produce a dozen Carnegie Hall concert videos.
Enormously talented international artists were invited to participate in this prestigious contest.
We captured awe-inspiring performances.

HOME – A UNITED NATIONS VIRTUAL REALITY PROJECT

Ban Ki-Moon, the Secretary-General of the United Nations was a Korean War refugee. His family was saved by the United Nations and UNICEF. HOME, produced by Hello World, follows the Secretary-General from Africa to the Middle East.
We witness his total commitment and are moved by his compassion for the largest population of refugees in the history of humankind.

AT&T – FEEL THE MUSIC

Feel the Music is an AT&T project to assist the Deaf and Hard of Hearing community celebrate and share their love of music.
Jules Dameron – an award-winning deaf artist, directed the WALK THE MOON music video "Different Colors". The production crew was drawn from the Deaf and Hard of Hearing community. The CSE Group reached out to Hello World to produce a video of the making of “Different Colors”. It was a memorable, moving experience...

General Electric - UNSEEN STARS

General Electric, BBDO & Obscura Digital have received considerable praise for UNSEEN STARS.
Thirty-two projectors were used to produce a light show on the ceiling of Grand Central Terminal honoring the achievements of twelve female scientists and engineers. This is a remarkable effort on the part of GE to encourage more female interest and empowerment in STEM. Hello World was tasked with virtual reality streaming the show. We also provided post production services for the VR video.

What People Say About Us